暢銷APP
/ / 【免費工具APP】Magic MonitorX|線上玩APP不花錢

【免費工具APP】Magic MonitorX|線上玩APP不花錢

玩免費工具APP|下載Magic MonitorX app不用錢|硬是要APP

Note: Magic Monitor does not seem to support iPhone 6 at this time. We will try to update the app soon.Magic Monitor is a unique customizable application for displaying different values from MCU's like ARDUINO, Propeller, Basic Stamp, PIC's or other peripherals that communicate via UART. The application uses the HID profile over bluetooth connection which is simply text strings of the values you want to display.You can choose up to 6 display boxes and each box can have a different unit. Also available are 6 LED's that may be turned ON and OFF as required by simple text command from your MCU device. A Text box is also available to send instructions or messages to the user.HID Bluetooth can be added to any MCU device that has a TX/RX UART by adding an HID Bluetooth device like Roving Networks RN-42 or BlueGiga WT12. Then you can simply write text commands to the device.Text format is simple - A control character specifies which box is the intended recipient, followed by the data followed by a delimiter character |example - #234.45|!4567.34| will enter the number 234.45 to Box1 and 4567.34 to Box 2.The control characters are Box1=# Box2=! Box3=% Box4=? Box5=& Box6=* TextBox=$Led's are turned on with ^1ON| or ^2ON| etc and turned OFF by ^2OFF| etc.Each command will need to be followed by a short delay in your code before sending the next command to compensate for differences in the bluetooth stack implementations. I found that a 50mSec delay worked well for an Arduino with RN-42 module sending to iPhone 5. Connection is simple. power on your device making sure that the bluetooth module is in discovery mode and discover it in iPhone Settings/Bluetooth just like any other bluetooth device and it should be discovered as a HID Keyboard. Make sure your MCU is not writing out data until you have launched the Magic Monitor App and touched the PLAY button.Version 1.1 is tested to work with iOS 7.1 and iPhone 5

玩免費工具APP|下載Magic MonitorX app不用錢|硬是要APP

玩免費工具APP|下載Magic MonitorX app不用錢|硬是要APP

玩免費工具APP|下載Magic MonitorX app不用錢|硬是要APP

線上24小時玩Magic MonitorX APP免費

下載工具APP-在線上免費玩Magic MonitorX APP

Magic MonitorX APP LOGO

Magic MonitorX 工具 App LOGO-硬是要APP

Magic MonitorX APP QRCode 立刻掃描下載

掃描Magic MonitorX 工具 QRCode 下載App-硬是要APP
APP分佈國家APP系統線上APP版本費用歷程APP評價上架時間更新時間
查詢中iOS
App Store
1.1
下載 App
NT$ 902012-12-102015-07-03

高評價工具App推薦

分享应用程序

与您的朋友通过一键分享您最喜爱的应用程序“安装包(APK)。分享应用程序会显示在你的手机安装的所有应用程序的列表。您可以通过蓝牙,ShareIt,Gmail时,升降梭箱,谷歌驱动器,Facebook的,WhatsApp的,线,Viber的,WeChat..etc共享任何应用程序只要找到该应用程序,并 …

看更多 »

共有アプリ

1クリックお友達とお気に入りのアプリのインストールパッケージ(APK)を共有する。共有アプリはお使いの携帯電話内のすべてのインストール済みのアプリケーションの一覧が表示されます。あなたは、Bluetooth、のShareIt、Gmailの、Dropboxが、Googleドライブ、フェイスブック、wh …

看更多 »

공유 애플 리케이션

한 번의 클릭으로 친구와 함께 당신의 마음에 드는 앱 설치 패키지 (APK)를 공유 할 수 있습니다.공유 앱은 휴대 전화에 설치된 모든 응용 프로그램의 목록이 표시됩니다. 당신은 블루투스, ShareIt, Gmail은, 보관 용, 구글 드라이브, 페이스 북, 싸이 월드 …

看更多 »

crazy 모닝콜 알람

가장 간단한 ..가장 강력한 ...가장 잔인한 모닝콜!!!이것은 매우 강력하고 스트레스 받을 수 있는 앱입니다.당신이 너무 많은 스트레스를 받을 경우,이 응용 프로그램을 제거하시기 바랍니다.ANGRY Mission - 형광등 200 lux 이상에서 1 분 동안 있어야 …

看更多 »

発信者名トーカ

どのように運転中に、発信者を特定する方法疑問に思う?またはお使いの携帯はまだ別の部屋にあるときでも、あなたをメッセージとして送られている誰が知りたいですか?500万以上のダウンロードを使用すると、発信者名トーカは完璧な解決策として来る..!発信者名トーカも、あなたの携帯電話を見て取ることなく、あなた …

看更多 »

바코드 QR코드 스캐너 - 에그몬

에그몬은 대한민국에서 가장 사랑받는 모바일 쇼핑 검색 도우미 입니다. 바코드와 QR코드 스캐닝 기능이 있습니다1.바코드 스캔하고 최저가 찾기 상품에 있는 바코드를 스캔하면 온라인에서 구매 가능한 사이트, 최저 가격, 사용자 후기들이 보입니다.스캔한 상품에 상품평을 남겨 …

看更多 »